Green Bay Dressed Beef LLC (Acme Street) an American Foods Group Company has opportunities for Maintenance I at our Acme plant.
As Maintenance I, you will:
- Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.).
- Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds.
- Perform routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate.
- Assemble, install or repair plumbing (e.g. threading pipe), equipment or machinery to keep machines, mechanical equipment, or the structure of an establishment in repair.
- Perform basic forklift maintenance (change tires, replace bushings, etc.).
- Perform basic hydraulics (e.g. change motors, make hoses, etc.).
- Complete necessary paperwork (PM sheets, work orders, etc.)
- Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix - hot/cold) in applicable area(s).
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for a Maintenance Mechanic II.
As Maintenance Mechanic II, you will:
- Perform tig, stick, mig welding.
- Perform intermediate plumbing (e.g. install and maintain piping).
- Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.)
- Perform routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate.
- Assemble, install or repair plumbing (e.g. threading pipe), equipment or machinery to keep machines, mechanical equipment, or the structure of an establishment in repair.
- Perform basic forklift maintenance.
- Perform basic hydraulics.
- Complete necessary paperwork (PM sheets, work orders, etc.).
- Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix hot/cold) in applicable areas.
- Notify lead or supervisor of any malfunctions or repairs needed.
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Cimpl's Meats, LLC, an American Foods Group Company, has an opportunity for a Mechanical Engineering Tech I at our Yankton, SD plant.
We offer a competitive total compensation package and starting pay of $25.25 per hour.
As our Mechanical Engineering Tech I you will:
- Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g., Cryovac, overhead chains, rail switches, conveyors, saws, etc.).
- Perform basic welding (e.g., primarily tig; and stick). Ability to identify good and bad welds.
- Perform routine preventive maintenance (e.g., grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate.
- Assemble, install, or repair plumbing (e.g., threading pipe), equipment or machinery to keep machines, mechanical equipment, or the structure of an establishment in repair.
- Assemble, disassemble, repair, or replace defective equipment or parts (e.g., change belts, gearboxes, etc.).
- Perform basic hydraulics (e.g., change motors, make hoses, etc.).
- Complete necessary paperwork in EAM system (PM sheets, work orders, etc.).
- Basic knowledge of electrical components and operation.
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Green Bay Dressed Beef, LLC (East River Facility), an American Foods Group company has opportunities for Electrician I at our East River Plant.
As Electrician I, you will:
- Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or ammeters, to ensure compatibility and safety of system.
- Modify, maintain, or repair electrical, electronic, equipment, or systems to ensure proper functioning; ensure all safety and lock out tag out procedures followed if applicable.
- Perform all electrical preventative maintenance and visual inspection for damage on equipment in applicable areas; ensure all safety and Lock out/Tag out procedures are followed if applicable.
- Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment or fixtures.
- NOTE: this description is not intended to be all inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Green Bay Dressed Beef, LLC., an American Foods Group Company, has opportunities for an Electrician I at our Acme Street plant in Green Bay, WI .
As an Electrician I, you will:
- Use basic hand and power tools (i.e. band saws, multi-meter, and other tools) to operate all assigned electrical and mechanical equipment for the purpose of troubleshooting, repair, preventative maintenance also conducts tests of installed/repaired equipment/machinery and makes final adjustments.
- Identify all parts, supplies, and services required to maintain equipment in assigned area and competes work orders in a timely manner meeting or exceeding pre-established deadlines to reduce downtime and meet production goals.
- Plan layout, install, maintain, diagnose, troubleshoot, dissemble, refit, repair, and/or rebuild electrical equipment, systems, and machines including automatic and process controls, switch boards, HMI, control center and panels, relays, circuit breakers electronic control, printers, and scales (portable, floor, and matrix-hot/cold).
- Perform maintenance and understand 110, 220, 480-volt single phase, three phases, controls, motor circuits and drive systems.
- Under supervision, installs, maintains repairs and/or rebuilds complicated machines and plant equipment.
- Advise management on continued operation of equipment could be hazardous.
- Complete necessary paperwork (PM sheets, work orders, etc.) and keep records of repairs and replacements made and causes of malfunctions.
- Assist with repairs and/or maintenance at Northland or Cold Storage.
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Skylark Meats LLC, an American Foods Group company has opportunities for Building Maintenance at our Omaha plant.
As our Maintenance Mechanic, you will:
-
Safely perform repairs and preventative maintenance on production floor and facility.
-
Work efficiently with production staff to support the day to day production processes with a sense of urgency.
-
Troubleshoot and rebuild on all types of food packaging machinery, motors, and similar devices.
-
Work safely with hydraulic, pneumatic, and thermal energies.
-
Report any deficiencies to a supervisor in a timely manner.
-
Maintain minimal production down time and solutions to reduce down time.
-
Correct use of lockout/tagout program.
-
Account for tools, utensils and other potentially dangerous equipment that are distributed daily.
-
Attend documented training on company procedures.
-
Keep the maintenance shop and all work areas clean and organized.
-
Follow all HACCP, SSOP’s, SOP’s, and GMP policies and procedures.
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Green Bay Dressed Beef Processing, an American Foods Group Company, has an opportunity for a PLC Programmer/Robot Electrical Technicianat our East River Plant in Green Bay, WI.
As a PLC Programmer/Robot Electrical Technician you will:
- Program, troubleshoot, and maintain company equipment and the facility.
- Be responsible for the day-to-day activities to project management tasks.
- Work closely with internal and external customers to keep our facility running efficient.
- Create, follow, and enforce a safe working environment.
- Engage in continued learning through company trainings, continued credits, and off-site classes.
- NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.
Cimpl's Meats,LLC, an American Foods Group Company has an opportunity for a Plant Chief Engineer to join our Cimpl's team in Yankton, South Dakota.
As our Plant Chief Engineer, you will:
-
Oversee daily operations of maintenance employees to ensure completion of preventative maintenance and failure maintenance activities.
-
Work with plant operations personnel to support daily production goals.
-
Work with VP of operations and harvest and fabrication managers to lead overall maintenance department.
-
Utilize plant systems to plan maintenance activities during production and non-production times.
-
Coordinate and manage weekend projects with outside contractors.
-
Oversee maintenance employees in trouble shooting of issues on plant equipment.
-
Work with quality assurance in facility to ensure all equipment meets QA and USDA guidelines for food safety.
-
Monitor and control downtime; provide solutions to reduce downtime.
-
Ensure all company and safety policies and procedures are enforced and followed.
-
Complete reports and other paperwork (e.g. discipline, progress evaluations, terminations).
-
Ensure all machinery is performing to the highest standard possible.
-
Maintain a helpful and professional attitude and appearance.
-
Promote and drive succession development with areas of responsibility.
-
NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal.