Career Opportunity Listing  

Long Prairie Packing Company, LLC., an American Foods Group Company, has opportunities for a Maintenance Mechanic at our Long Prairie, MN plant.   As our Maintenance Mechanic, you will: - Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g., Cryovac, overhead chains, rail switches, conveyors, saws, etc.). - Perform basic welding (e.g., primarily tig; and stick). Ability to identify good and bad welds. - Perform routine preventive maintenance (e.g., grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently...

Long Prairie Packing Company, LLC an American Foods Group Company has opportunities for Refrigeration Maintenance Mechanic.   As Refrigeration Maintenance Mechanic, you will: - Maintain, disassemble, reassemble, repair, test, and inspect industrial ammonia refrigeration system, boilers, air compressors and/or associated equipment to include preventive maintenance. - Assist with troubleshooting and repair of all systems and/or equipment components. - Assist with maintaining P&ID drawings for refrigeration systems. - Maintain logs and required paperwork. - Maintain water treatment system for boilers and condensers with...

Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for Electrician I.   As Electrician I, you will: - Installation of electrical wiring, equipment, or fixtures, based on job specifications and electrical codes, and then carry out plan; ensure all safety and lock out tag out procedures are followed if applicable. - Inspect and repair electrical systems, equipment, or components to identify hazards, defects, to ensure compliance with electrical codes; ensure all...

Job Summary The Lead Person must have basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and Welding (TIG, STICK). Leads must be able to work either as a team or individually. Must comply with all company safety rules, lockout tagout (loto) and Good Manufacturing Practices (GMP’s).   Key Responsibilities - Lead up to 5 team members to perform daily tasks and paperwork - Implement mechanical and engineering projects - Ensure all assigned daily PM’s and paperwork are completed - Ensure production lines are in good mechanical order - Aid other teams (Production, Quality-...

Green Bay Dressed Beef LLC (Acme Street) an American Foods Group Company has opportunities for Maintenance I at our Acme plant.     As Maintenance I, you will: - Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.). - Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds. - Perform routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the...

Green Bay Dressed Beef Processing, LLC, an American Foods Group company, has opportunities for a Maintenance Mechanic I at our East River plant in Green Bay, WI.   As our Maintenance Mechanic I, you will: - Assist higher level mechanics with duties (i.e. servicing, repairing, adjusting and testing machines, devices, moving parts and equipment that operate primarily on the basis of mechanical principles).  - Perform preventative and predictive maintenance on facility machinery (ex. Grease, change bearings, replace worn parts on machinery) to ensure machinery runs at...

Green Bay Dressed Beef Processing, LLC, an American Foods Group Company has an opportunity for Maintenance at our Northland plant in Green Bay, WI.   As Maintenance, you will: - Check ammonia compressors for ammonia leaks, oil levels, suction levels. - Check air compressor, kemco, boiler, and high-pressure water. - Check production floor to verify all production equipment is working. - Fix break downs (wiring, motors, welds, hydraulics, etc.) - Maintain waste water daff unit. - Do preventive maintenance (oil changes, grease, etc.). - Drain the soak tank and raise the soak...

Job Summary The Maintenance Mechanic role requires basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and Welding (TIG, STICK). Mechanics must follow all safety and GMP’s for the facility at all times.   Key Responsibilities - Follow all company safety policies and procedures - Ensure all assigned daily PM’s are completed - Ensure production lines are in good mechanical order - Aid other teams (Production, Quality- when needed) - Setup and visually inspect and tests machinery and equipment and tear down - Listens for unusual sounds from machines or equipment to...

Job Summary The fab projects maintenance tech must have basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and advanced Welding (TIG, STICK). Leads must be able to work either as a team or individually. Must comply with all company safety rules, lockout tagout (loto) and Good Manufacturing Practices (GMP’s).   Key...

Gibbon Packing, LLC, an American Foods Group Company, has opportunities for Yards at our Gibbon, NE plant.   As Yards, you will: - Empty trash trailer. - Bail cardboard. - Deliver chemicals and lubricants - Clean off inedible dock in the morning and afternoon. - Pickup trash in the guard shack, front of plant, maintenance shop, maintenance office, truck shop, boiler room, engine room, rendering office, and pens. - Empty chemical barrels in racks. - Break down combos, dispose of trash, bail combos, gather pallets and take to pallet wash. - Trolley rebuild, cutting board resurfacing, barrel fan...

Gibbon Packing, LLC, an American Foods Group Company, has an opportunity for a Maintenance Mechanic at our Gibbon, NE plant.    As Maintenance Mechanic, you will: - Predictive maintenance; vibration analysis to predict failure. - Preventive maintenance; lubrication and inspection at specified time intervals. - Repair maintenance; repair after equipment failure. - Ensure all safety and lock-out-tag-out procedures are followed, if applicable. - Maintain logs and required paperwork. - Maintain, disassemble, reassemble, repair, test, and inspect production equipment. - NOTE: this description is not intended to...

Job Summary The Maintenance Supervisor must have basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and Welding (TIG, STICK). Supervisors must be able to work either as a team or individually. Must comply with all company safety rules, lockout tagout (LOTO) and Good Manufacturing Practices   Key Responsibilities - Lead up to 10 team members to perform daily tasks and paperwork - Organize and implement mechanical and engineering projects - Ensure all assigned daily PM’s and paperwork are completed - Ensure production lines are in good mechanical...

Job Summary This is a position that oversees, operates and maintains a complex industrial wastewater pretreatment system that contains a variety of wastewater treatment processes and auxiliary equipment for the processing and handling of industrial wastewater and generated industrial byproducts.   Key Responsibilities - Operate and monitor all wastewater pretreatment plant equipment and make necessary adjustments based on findings. - Take periodic samples and perform and record the results of various tests to assess and monitor the condition of the system and determine optimal chemical and biological treatment. - Maintain the efficiency of plant...

Job Summary As an Electronics Technician, the role will be responsible for the installation, maintenance, and repair of electronic equipment and systems. The role involves diagnosing and resolving technical issues, performing routine inspections, and ensuring that all electronic devices operate efficiently and reliably. The technician will work closely with engineering and production teams to support the development and enhancement of electronic systems and provide technical expertise to troubleshoot and address any malfunctions.   Key Responsibilities: - Installing and configuring electronic systems and equipment according to specifications and...

Job Summary The Jarvis Maintenance Technician role requires basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and Welding (TIG, STICK). Mechanics must follow all safety and GMP’s for the facility at all times.   Key Responsibilities - Follow all company safety policies and procedures - Ensure all assigned daily PM’s are completed - Ensure all Jarvis tools are in good mechanical order - Aid other teams (Production, Quality- when needed) - Setup and visually inspect and tests machinery and equipment and tear down - Listens for unusual sounds...

Job Summary The Maintenance Mechanic role requires basic knowledge of General Maintenance, Hydraulic Systems, Pneumatic, Electrical and Electronic Systems, and Welding (TIG, STICK). Mechanics must follow all safety and GMP’s for the facility at all times.   Key Responsibilities - Follow all company safety policies and procedures - Ensure all assigned daily PM’s are completed - Ensure production lines are in good mechanical order - Aid other teams (Production, Quality- when needed) - Setup and visually inspect and tests machinery and equipment and tear down - Listens for unusual sounds from machines or equipment to...

Job Summary The Mechanical Engineering Utility Technician is responsible for safely operating, monitoring, adjusting and maintaining a variety of utility systems, including high pressure steam boilers, ammonia refrigeration, well water, potable water, hot water, fire suppression, pneumatic, and HVAC equipment. This role requires hands-on experience with a diverse range of mechanical and electrical systems, as well as the ability to perform routine and emergency repairs, preventative maintenance, and system inspections. The operator must be proactive, self-directed, and able to work effectively with minimal supervision.